BEHIND THE PRODUCT
Composition:
Legs 80%Polyamide 20%Elastane; Front Panel 90%Polyester 10%Elastane; Sleeve 80%Polyester 20%Elastane; Pocket Ramp 94%Polyamide 6%Elastan; Pocket 76%Polyamide 24%Elastane; Back Insert 100%Polyester; Pocket Insert, Padding Insert 85%Polyester 15%Elastane
Size and fit:
The male model is 177cm tall and is wearing a size S.
His measurements are: 68kg in weight, 90cm chest, 77cm waist, and 91cm hips.
If you’re unsure about your size, please consult our Size Guide to find the best fit.
TECHNOLOGY OVERVIEW
THE FINER DETAILS
-
FEATURED FABRICS
The jersey portion's Hill Rombo is a lightweight, breathable textile with proven aerodynamic gains in the wind tunnel. On the sleeves, 550CX provides similar drag reduction with a breathable and highly elastic second-skin fit. Type.911 is the same textile on the EQUIPE RS S11 bib shorts, employed here for silky-smooth compression and abrasion-resistance on the shorts section. It also dries quickly, preventing weight gained through lingering moisture, and it's equipped with UPF 50+ protection and odorControl.
-
CONSTRUCTION/FIT
Our most aggressive, most aerodynamic equipment. The legs are cut longer than our typical racingFit design, and the zeroNeck construction is more open than our standard RS Jerseys, allowing easier breathing during high-intensity efforts.
-
ENGINEERING
Radio Pocket:
Radio storage and internal cable routing maintain clean aerodynamics.Soft compression Module:
Provides muscle-enveloping, omnidirectional compression and stability with a waist construction that eliminates restriction in aggressive riding positions. -
ENGINEERING
Bonded + Raw Cut:
Bonded seams and raw-cut legs eliminate bulk and reduce drag and irritation.skinGrip Finish:
Anti-slip finishing secures the legs in place without excessive pressure.Â
-
RS S11 INSERT
Shock-Absorb Damping System Mono:
Compressive foam materials in a single-layer 9mm racing platform that minimizes volume and weight. Thermoformed shaping eliminates ridges and irritation.3D Waffle:
A patented, three-layer, perforated foam that increases breathability and eliminates excess weight. -
RS S11 INSERT
kraterCooler:
Perforations in the inserts' leading edge draw intercooling air to maintain breathability and a dry, cool microclimate.goldenGate 2.0:
The insert is attached at front and rear with floating sides and center, letting it move with your body rather than against it. New cut-outs on the sides reduce volume and friction throughout the pedal stroke. -
RS S11 INSERT
Mineral Tec Surface:
A soft, ultrasmooth coversheet that reduces friction and irritation while promoting comfort with quick-drying properties and permanent odorControl.whirlKrater:
Perforations strategically distributed throughout the insert, creating a whirlwind of cooling airflow instead of just a unidirectional breeze.
Size Chart


























Reviews
There are no reviews yet.